Garbage Disposal Repairs and Replacement in Topeka, KS

Expert Garbage Disposal Service by a Licensed Master Plumber

If your garbage disposal is jammed, leaking, or not turning on, you need reliable service from an experienced professional. I’m Jamie O’Harra, owner of O’Harra’s Plumbing Service, and I provide garbage disposal repairs and replacements in Topeka and Northeast Kansas.

With over 27 years in plumbing and appliance installation, I’ve repaired and replaced thousands of disposals. Whether your unit just needs a reset or it’s time for a new model, I’ll handle it efficiently and make sure everything is connected and sealed properly.

As a licensed master plumber, I take the time to do the job right—no shortcuts, no guesswork, and no leaks.

Common Garbage Disposal Problems I Repair

Garbage disposals are durable but not indestructible. These are the issues I most often fix for homeowners in Topeka:

Gear icon with check mark inside.

Jammed Blades

Food debris, bones, or foreign objects can jam the impeller blades and stop your disposal from spinning. I safely clear the obstruction, test the motor, and restore normal operation.

Gear icon with a check mark inside.

Disposal Won’t Turn On

If your unit doesn’t start, it could be a tripped circuit, burned-out motor, or faulty switch. I’ll diagnose the problem and repair or replace components as needed.

Gear with checkmark, indicating settings and completion.

Leaking Disposal

Leaks can develop at the sink flange, discharge pipe, or internal seals. I locate the source, tighten or reseal connections, or install a new unit if the body is cracked.

Gear icon with a check mark inside.

 Unusual Noises

Grinding, rattling, or humming noises may indicate a jammed blade, loose parts, or internal motor wear. I’ll determine the cause and correct it before it leads to bigger issues.

Gear icon with a checkmark inside.

 Slow Draining or Clogged Disposal

If your sink backs up when the disposal runs, there’s likely a blockage in the drainpipe or discharge line. I’ll clear the obstruction and flush the system for smooth drainage.

When to Replace Your Garbage Disposal

While many disposal issues can be repaired, there are times when replacement makes more sense. I typically recommend replacement if:

  • The motor is burned out or frequently trips the reset button.

  • The disposal is more than 10 years old.

  • The unit leaks from the housing or base.

  • Repairs cost more than half the price of a new model.

  • The disposal struggles to grind food effectively.

I’ll explain your options and help you select a new, high-quality unit that fits your sink and plumbing setup.

A chair with a yellow pillow and a necklace on it
A bunch of incense sticks are sitting on top of each other on a table.
A statue of a mosaic head is sitting on a wooden stump.

My Garbage Disposal Replacement Process

Replacing a garbage disposal requires proper alignment, secure fittings, and leak testing. I follow a detailed process for every installation:

Black rounded rectangle in the bottom right corner of a white background.

Inspection: I check the existing wiring, drain connections, and mounting assembly to ensure compatibility.

Black rounded rectangle in the bottom right corner.

Removal: I safely disconnect and remove the old disposal, cleaning and prepping the sink flange and pipes.

Black rounded rectangle in the bottom right corner of a white background.

Installation: I install the new unit, connect electrical and drain components, and tighten all fittings securely.

Black semi-circle on a white background.

Testing: I run water and operate the disposal to confirm proper grinding, drainage, and leak-free performance.

Black rounded rectangle at the bottom right corner on a white background.

Cleanup:

 I wipe down the area and leave your sink clean and ready to use.

Each installation meets Kansas plumbing code requirements and manufacturer standards.

Benefits of a Professional Disposal Installation

Black valve with a handle, connecting two pipes.

Leak-Free Performance

I ensure all seals, flanges, and drain connections are watertight and properly aligned.


Black valve with a handle, used for controlling the flow of a liquid or gas.

Safe Electrical Connections

I verify that your disposal wiring and switches are properly grounded and safe for operation.


Black and white illustration of a valve in a pipe.

Longer Equipment Life

Proper installation helps your disposal run quietly and efficiently for years without strain on the motor.


Black and white icon of a pipe with a valve, indicating control or regulation.

Expert Troubleshooting

If you’re unsure whether repair or replacement is best, I’ll evaluate your system and give you honest, cost-effective recommendations.


Why Choose O’Harra’s Plumbing Service

Black square with a white check mark.

 Licensed Master Plumber

With more than 27 years of experience, I bring expert skill and precision to every garbage disposal job.

Black check mark icon in a black square.

One-on-One Service

I handle all work personally—no subcontractors or rotating crews—so you always know who’s in your home.

Black checkmark inside a rounded square.

Honest Pricing

You’ll receive clear, upfront pricing before I begin any work. I don’t push unnecessary upgrades or hidden fees.

Black check mark inside a rounded square.

Reliable Results

Each repair and replacement is tested, verified, and guaranteed to perform as expected.

Recent Works

Recent projects in Leawood highlight our attention to detail and commitment to excellence, transforming outdated bathrooms into beautiful, functional spaces.

Excavator bucket digging a narrow trench beside a building. Red and orange machinery, dirt and debris.
Trench with a white pipe installed, near a house with stairs. Dirt piles surround the trench.
Water flowing into a stainless steel sink drain.
Rusty pipes, cut open, laying on green grass. The interiors show corrosion and sediment.

Service Area

I provide garbage disposal repair and replacement services throughout Topeka and Northeast Kansas, including Lawrence, Olathe, Overland Park, Shawnee, Lenexa, and Leawood. My shop is located at 1335 Southwest Auburn Road, Suite 109, Topeka, Kansas 66615, and I’m available Monday through Friday, 8:00 a.m. to 6:00 p.m.

 FAQs

  • Can you repair any brand of garbage disposal?

    Yes. I service and replace most major brands, including InSinkErator, Waste King, and Moen.

  • How long does a garbage disposal last?

    Most disposals last 8–12 years depending on use and maintenance. Proper installation and regular cleaning extend their lifespan.

  • Do you provide the disposal, or should I buy one?

    I can install a customer-supplied unit or provide a reliable model that fits your sink and plumbing system.

  • My disposal hums but doesn’t spin. Can it be fixed?

    Often, yes. A jam or seized impeller can usually be cleared safely. If the motor has burned out, replacement may be necessary.

  • Can I use my disposal with a septic system?

    Yes, but only specific models designed for septic use should be installed. I can recommend and install the proper type for your home.

Call O’Harra’s Plumbing for Garbage Disposal Service

If your disposal is jammed, leaking, or ready for an upgrade, contact O’Harra’s Plumbing Service for expert garbage disposal repair and replacement in Topeka and Northeast Kansas.

Call (785) 260-0521 or email jamie@oharrasplumbing.com to schedule service. I’ll make sure your new or repaired disposal runs smoothly, quietly, and safely.

Business hours: Monday–Friday, 8:00 a.m. to 6:00 p.m.
Address: 1335 Southwest Auburn Road, Suite 109, Topeka, KS 66615